Template:Suitable measures for Hydropeaking indicator

Relevant measures
Baffle fishways
Bottom-type intakes (Coanda screen, Lepine water intake, etc)
Bypass combined with other solutions
By-passing sediments
Cleaning of substrate - ripping, ploughing and flushing
Complete or partial migration barrier removal
Construction of a 'river-in-the-river'
Construction of off-channel habitats
Fish Protection System (induced drift application)
Drawdown reservoir flushing
Environmental design of embankments and erosion protection
Fish guidance structures with narrow bar spacing
Fish guidance structures with wide bar spacing
Fish lifts, screws, locks, and others
Fish-friendly turbines
Fish refuge under hydropeaking conditions
Fishways for eels and lampreys
Mechanical removal of fine sediments (dredging)
Migration barrier removal
Minimizing sediment arrival to reservoir
Mitigating rapid, short-term variations in flow (hydro-peaking operations)
Mitigating reduced annual flow and low flow measures
Mitigating reduced flood peaks, magnitudes, and frequency
Nature-like fishways
Off-channel reservoir storage
Operational measures (turbine operations, spillway passage)
Other types of fine screens
Placement of dead wood and debris
Placement of spawning gravel in the river
Placement of stones in the river
Pool-type fishways
Removal of bank protection
Removal of debris
Removal of weirs
Restoration of the riparian zone vegetation
Sediment sluicing
Sensory, behavioural barriers (electricity, light, sound, air-water curtains)
Skimming walls (fixed or floating)
Truck transport
Vertical slot fishways
Relevant test cases
Altheim test case
Altusried test case
Anundsjö test case
Bannwil test case
Bragado test case
Freudenau test case
Gotein test case
Guma and Vadocondes test cases
Günz test case
Ham test case
Las Rives test case
Schiffmühle test case
Trois Villes test case