Truck transport

Introduction

File:Nature like figunz square.jpg

Figure 1:

In the case of high head migration barriers, and especially where there are a series of barriers after each other, catch and transportation of fish on tank lorries has been used. The method can be used for up and down migration and has been used for eel, glass eel and salmon smolt. In Norway, this has been used to release adult salmon and sea trout above artificial and natural barriers, to ensure or increase fish production. The method relies on good catch efficiency and requires relatively large effort. It is basically very selective and requires repetitions in the long term but can still contribute to the occurrence or fish production of a species when other durable solutions are not realizable. Capture and transport can also be used as a temporary solution until a lasting solution is in place. The solution is used in special cases and is not recommended as a best practice.

Methods, tools, and devices

During planning

Planning of truck transport of fish must discover the relevant road system and parking places for loading and emptying the tank truck. In particular, a system for collecting fish and filling the truck must be planned, including a lifting or pumping system. A counting system for fish should be considered

During implementation

The implementation requires road and construction works and mechanical installations for a filling and counting station system downstream or next to a powerplant and a parking place for emptying the truck.

During operation

The maintenance is connected to the truck itself and any other pumping or monitoring systems.

Relevant MTDs and test cases

Relevant MTDs
3D fish tracking system
3D sensorless, ultrasound fish tracking
Barotrauma detection system
Radio frequency identification with passive integrated transponder (PIT tagging)
Visible implant elastomer
Relevant test cases	Applied in test case?
N/A	-

Classification table

Classification	Selection
Fish species for the measure	All
Does the measure require loss of power production	-
	-
	Structural (requires no additional flow release)
Recurrence of maintenance	Irregular at events
Which life-stage of fish is measure aimed at	-
	-
	-
	Movements of migration of fish
Which physical parameter is addressed	N/A
	-
	-
	-
	-
	-
	-
	-
Hydropower type the measure is suitable for	Plant in dam
	Plant with bypass section
Dam height (m) the measure is suitable for	All
Section in the regulated system measure is designed for	In dam/power plant
	Upstream of hydropower plant
	Bypass section
	Downstream outlet
River type implemented	Steep gradient (up to 0.4 %)
	Fairly steep with rocks, boulders (from 0.4 to 0.05 %)
	Slow flowing, lowland, sandy (less than 0.05 %)
Level of certainty in effect	Moderately certain
Technology readiness level	TRL 8: system complete and qualified
Cost of solution	See cost table