Sediments

Introduction

Figure 1: Sediments trapped in front of intake to a power plant in the Adjaristsqali River, Georgia.

Sediments can be classified according to their size:

• Coarse sediments: Consisting of stones, gravel and sand
• Fine sediments: Consisting of silt and clay

Coarse sediments compose river beds, bars, and banks. They act as a barrier against river incision and bank erosion, and they serve as shelter and spawning habitats for aquatic species. Fine sediments play a major role for the transport of nutrients through the river by absorbing nutrients onto clay. Their abstraction may result in significant ecological impacts. Fine sediments, when they are suspended in water, increase water turbidity, but they can also deposit between gravels, and clog interstitial shelter habitats, or affect spawning areas.

Dams act as a barrier in the hydrological system as they interrupt the continuity of sediment transport through rivers systems. Sediments are trapped in reservoirs and reduce reservoir capacity, impacting the sustainability of the reservoirs, in terms of power production and water supply. It also induces a deficit of sediments downstream reservoirs leading to morphological and ecological consequences in the downstream rivers.

Coarse sediments are trapped in reservoirs, resulting in lack of coarse sediments downstream the dam, while trapping of fine sediments in reservoirs depends mainly on the sediments size and the reservoir residence time. Some fine sediments do not deposit and pass through the turbines. They consist of silt and clay and are transported in the river system mostly without any deposition or storage. They are often called wash load.

On the opposite, some rivers face high to extreme levels of sediments delivered to and deposited to the riverbed. Sediments deposition is a natural process occurring in rivers, which depends on river topography, water velocity among other factors that can be modified by human activities. Change in land-use has particularly impacted the sediment cycle by accelerating the delivery of sediment to rivers and increasing the quantity of smaller particle sizes. Excess of sediments directly affects the habitat quality for biotic communities as explained above.

In dammed rivers, sedimentation management should be anticipated already in the planning phase of dam and reservoir construction. During the design phase an extensive analysis of sedimentation processes should be carried out, including estimation of sediment yields entering the reservoir, projections of future sedimentation load, calculation of sediment trapping rate in the reservoir and simulation of the rivers' sediment transport capacity. In rivers with modified land-use in the surrounding catchment, sediment delivery should also be calculated by measurements and modelling and be prevented with mitigation measures.

Sediment management and mitigation in rivers aim at sustaining the natural processes in rivers and, including the sediments composition and related water quality. In dammed rivers, sediment mitigation focuses also on ensuring sustainable management of hydropower reservoirs. Mitigation measures consist in 1) routing sediments through and around the reservoirs, 2) removing sediments accumulated in reservoirs, and 3) adding or removing sediments in the downstream river, 4) minimizing the amount of sediment arriving to the river.

Mitigation measures can also be classified according to their location in the river system (reservoir, dam, river) and the issues they address (loss of reservoir capacity, downstream, starvation, excess of sediments in the river). Some measures, like flushing, sluicing, bypass, etc., have been specifically designed to address the issue of reservoir sedimentation and the induced loss of capacity storage. However, if correctly designed and planned, these measures can contribute to balance the lack of sediments in downstream rivers.

The measures only addressing loss of reservoir storage capacity, without mitigating lack of sediments load downstream of dams are not considered as an improvement measure with respect to ecological conditions in rivers. Hence, they will not be addressed in the FIThydro project.

Category	Where	Issue addressed			Measure
		Reservoir capacity	Downstream starvation	Excess of sediments
Routing of sediments around reservoirs	Reservoir	x	x		By-passing sediments
			x		Off-channel reservoir storage
Removing sediments in reservoirs	Dam	x	(x)		Drawdown reservoir flushing
		x	(x)		Sediment sluicing
		x	(x)		Turbidity current venting
		x			Mechanical removal (dredging)
Adding or Removing sediments in river	River		x		Gravel augmentation/stone augmentation
				x	Mechanical removal (dredging)
Minimizing sediments arrival	Upstream catchment	x		x	Check dams
		x		x	Sediments traps
		x		x	Warping
		x		x	Erosion control

Sediment measures

The various measures to mitigate issues concerning sediments are listed below.

• 

  Drawdown reservoir flushing

• 

  Sediment sluicing

• 

  By-passing sediments

• 

  Off-channel reservoir storage

• 

  Minimizing sediment arrival to reservoir

• 

  Mechanical removal of fine sediments (dredging)

• 

  Mitigating reduced flood peaks, magnitudes, and frequency

• 

  Placement of spawning gravel in the river

• 

  Placement of stones in the river